The Hamler Tools Sharpening Fixture
Step 1 - continued.
Grinding the Face Angle - using the "FA" holes.
The picture above shows the pins in the "FA" holes.
Step 2 - Not Illustrated.
Pins are inserted into the "TC" positions.
"TC" is for Top Clearance.
This step is to remove excess material on the graver
and to speed the task on subsequent sharpenings.
The step may not be necessary for several resharpenings of the graver.
Pins are inserted into the "TC" positions.
"TC" is for Top Clearance.
This step is to remove excess material on the graver
and to speed the task on subsequent sharpenings.
The step may not be necessary for several resharpenings of the graver.