The Hamler Tools Sharpening Fixture
Step 2 - Not Illustrated.
Pins are inserted into the "TC" positions.
"TC" is for Top Clearance.
This step is to remove excess material on the graver
and to speed the task on subsequent sharpenings.
The step may not be necessary for several resharpenings of the graver.
Step 3 - Secondary Relief
Step 4 - The Primary Heel
Pins are inserted into the "TC" positions.
"TC" is for Top Clearance.
This step is to remove excess material on the graver
and to speed the task on subsequent sharpenings.
The step may not be necessary for several resharpenings of the graver.
Step 3 - Secondary Relief
Step 4 - The Primary Heel