The Hamler Tools Sharpening Fixture - Step 5
Step 4
The Primary Heel
Pins are in the "PH" positions and the Primary Heel is polished.
Notice the view at the left showing the graver in the "PH" slot.
After polishing one side, rotate the template to do the other side of the graver.
The ceramic lap is used for this step.
The Primary Heel
Pins are in the "PH" positions and the Primary Heel is polished.
Notice the view at the left showing the graver in the "PH" slot.
After polishing one side, rotate the template to do the other side of the graver.
The ceramic lap is used for this step.
Step 2 - Top Clearance
Not Illustrated.
Pins are inserted into the "TC" positions.
"TC" is for Top Clearance.